Skip to main content

Posts

Alkaline Trio Lyrics Colour change LED candles

Hey everyone, hope you are well! I am here with some candles I decorated with lyrics from some of my favourite Alkaline Trio songs. I used a set of colour changing LED candles with a controller so they will last longer than traditional candles and have lots of different 'looks'.

I printed the lyrics out and traced them onto tissue paper, and did the same with the heartskull for the largest candle. I then stamped stars and butterflies because they related to the lyrics. I then used greaseproof paper wrapped around the tissue paper I placed on the candles and heated it until the tissue paper disappeared.

I would like to enter this into the following challenges:
Creative Moments: Anything Goes
Inspiration Destination: Anything Goes
Wonderful Wednesday: Anything Goes
Cards and More: Anything but a Card
Crafty Sentiments: Anything Goes
Lemon Shortbread Challenge: Anything Goes

Thank you for looking and for all your lovely comments!

Alkaline Trio Art LED canvas

Hey everyone, I hope you are well! I am here with a piece of art I created inspired by my favourite band Alkaline Trio.

First of all I designed the image on crafting software. The heart skull is their logo and I wanted to create incorporating it into the design. I printed onto a heavy canvas style cardstock.

I then sewed and glued fairy lights on the inside of my canvas. When I was done I cut the design to size and glued it to the front of the canvas. Next I made tiny little pin holes around the swirls and music design to allow little areas of the design to be highlighted.

I would like to enter this into the following challenges:
Brown Sugar Challenge: Anything Goes
Creative Artiste Challenge: Anything Mixed Media Goes
Creative Corner: Anything Goes
Creative Fingers: Anything Goes
Crafting with an Attitude: Anything Goes
Avenue 613 Create: Anything Goes
Love to Create Challenge: Anything Mixed Media Goes

Thank you for looking and for all your lovely comments!

Stamped LED Candle

Hey everyone, I hope you are well! I am here with a make using an older method with a newer material. I love the stamped candle technique but I wanted to experiment and see if I could make it work on the new LED no flame candles because they are safer than a naked flame.

I bought some LED candles from a store, some white tissue paper, grease proof paper, and got out my stamps and ink pads.

Before I started with each candle I checked they worked with batteries inserted. Worse thing would be finding out the stamped creation didn't work and that you couldn't get a refund! Remember to remove the batteries before starting the process.

I stamped onto the white tissue paper, cut closely around the image and placed where I wanted it on the candle. I then wrapped the grease proof paper around the candle and used my heat tool to melt it into the wax. It worked fine! I was very pleased that it still worked fine when I returned the batteries after the candle cooled too.

This way the cand…

Vintage Butterfly 3D Box Frame Art

Hey everyone, hope you are well! I am here with a Vintage butterfly wings 3D display. I used an image of butterfly wings from a vintage book found on the graphics fairy site. I printed it twice so I could use a layer for 3D wings.

I carefully cut out just the wings from one of the printed sheets and then to make them appear like real butterfly wings I shaped them with a curve and attached 3D foam pads on the outer edges of the outside of the wing. I then dipped the inside of the wing in pva then placed them on the other printed sheet. That way the wing curves up like its real.

I mounted onto a sheet of cardstock covered with cotton and then placed in a box frame.

I would like to enter this into the following challenges:
Crafting with an Attitude: Anything Goes
Crafty Girls Creations: Anything Goes
Cute Cards Tuesday: Anything But a Card
Southern Girls Challenge: Pop it Up
Crafty Gals Corner Challenge: Anything But a Card
Crafting By Designs: Anything Goes
Creative Moments: Anything Goes

Tha…

Billy Talent Swallow LED backlit canvas

Hey everyone, I hope you are well! I am here with a canvas I made as a thank you for being invited to a Billy Talent show on the guest list. There was a mess up with my order of their new album and to apologise they asked me to come along. They are one of my favourite bands so I was very happy!

They have used swallows in their album art so I decided to create with that idea as my inspiration. I found a vintage image of a swallow and put it into Craft Artist 2 program where I reshaped and coloured them to my taste for this project.

I then created the banner in the program too. I printed the images and banner out onto the same kind of card stock I used for the top layer of my canvas and carefully hand cut them all, including the banner.

I then placed the banner on foam pads so the centre of the banner is lifted off the canvas and the ends of the pattern are glued directly onto the canvas to give dimension.

I then created the pattern with the swallows and glued them in place. Lastly I h…

Shrink Plastic Swallows Necklace

Hey everyone, I hope you are well! :) I am here with a necklace I made using vintage images of swallows, printable shrink plastic, chain, jump rings and a lobster clasp.

I started by creating the swallows in different colours in Craft Artist 2 software and making them a size I thought would work once shrunk to around half. I printed them off and carefully punched and cut around them. I tried to make the holes so the swallows would 'fit' once shrunk in a flying pattern.

I then used my heat gun to shrink them all. After I had shut them in a book to make sure they flattened I got out the jump rings and attached them to each charm. Next was the tricky part trying to fit them together. Luckily they fit quite well and I just attached each jump ring to the next bird. Lastly I added the chain and catch.

To varnish them to stop colour transfer once worn I painted them with a couple of coats of mod podge.

I would like to enter this into the following challenges:
Crafting with an Attitud…

Crafty Ribbons Nautical Ribbons Jute Corkboard

Hey everyone, hope you are well :) I am here with our 'Anything Goes' Challenge at Crafty Ribbons to show you a very quick and easy update to decor. I have some jute from making my silver jute corkboard a few weeks ago and it inspired me to try this way. I used a blank canvas, jute, cork sheets and Nautical ribbons from Crafty Ribbons.

I started with the blank canvas. Over the canvas I placed a sheet of cork. I then padded the back of the canvas with cork too-finishing by backing the canvas with a thick cardboard sheet.
Next I covered the canvas with jute, then added the ribbons to the edges for decoration.

A very inexpensive and quick way to update your decor!

I would like to enter this into the following challenges:
Altered Eclectics: Anything Goes
Crafting with an Attitude: Anything Goes
Crafty Girls Challenge: Anything Goes
Inspiration Destination: Anything Goes

Thank you for visiting and for all your lovely comments!